H-section Steel Fiber Laser Cutting Machine
The bed is formed through multiple processes including welding, heat treatment, rough machining, precision machining, and painting.
The beam adopts a welded structure. It undergoes rough machining after stress-relief annealing, followed by precision machining after secondary vibration aging treatment. This process effectively eliminates stresses induced by welding and machining, significantly enhancing the machine tool’s stability.
The dual-station setup allows one station to perform cutting while the other simultaneously handles loading/unloading via crane, significantly reducing idle time for material handling.
Protective sheet metal panels are installed on both sides of the beam, covered with a flame-resistant plate to prevent splattering of molten slag during cutting. Additionally, the equipment is equipped with cameras for real-time monitoring of the cutting process.
Real-time profile size measurement and compensation prevent cutting misalignment, head collisions, and incomplete cuts. The nesting software seamlessly interfaces with Tekla for efficient drafting and material layout.
The 3D 5-axis technology delivers ultra-high efficiency, achieving processing speeds up to 15 times faster than manual operations.
A one-stop solution for steel structure fabrication, capable of processing both plates and profiles for composite welded sections. In addition to straight cutting, it performs bevel cutting – multiple machining requirements fulfilled by a single machine.
실제 절단 조건에 맞춰 더 스마트하고, 더 안전하고, 더 편리하고, 더 효율적으로 가공할 수 있도록 최적화되어 있습니다.
the Bochu steel section cutting system, adopts a visual coarse positioning + visual fine positioning method. It uses the BCW contour scanner to measure and compensate for the deviation between the steel section workpiece and the drawing in real time, ensuring processing accuracy and stability, and avoiding cutting misalignment and head collision problems caused by the inconsistency between the drawing and the actual workpiece.
Precise tool path compensation for both flanges and web plates minimizes thermal deformation while producing smooth, single-pass cuts. This eliminates complex secondary processes and reduces labor costs.
automatic adjustment of contour parameters + interference detection of the cutting head model.
장비 센서를 통해 절단 품질을 판단하고 실시간으로 파라미터를 조정하여 절단 효율과 안정성을 향상시킬 수 있습니다.
자세히 알아보기
효율성 향상30%
지능형 보호 및 안전한 생산
지능형 베벨 커팅 헤드는 ±45° 베벨 커팅이 가능하여 한 번에 여러 개의 베벨을 형성하여 커팅 효율을 두 배로 높일 수 있습니다.
H-section Steel Fiber Laser Cutting Machine
처리 영역
35000×4550×3000mm
Steel processing range
100mm≤b≥400mm
100mm≤h≥1000mm
처리 영역
32000×7000×3700mm
Steel processing range
100mm≤b≥400mm
100mm≤h≥1000mm
Sheet metal processing range
3000×25000mm
영업일 기준 1일 이내에 답변을 받으실 수 있습니다.
영업일 기준 1일 이내에 답변을 받으실 수 있습니다.
